This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Click to Connect

The software does not see the ECU and gives a Click to Connect or a Could not connect to ECU message.

Close FrameShop.

Turn off the ECU.

Unplug the USB cable from the back of the ECU and from the computer.

Replug in the USB cable from the back of the ECU and from the computer.

Turn on the ECU.

Reopen the FrameShop software. The software should detect the ECU.

  • No labels