This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

File Menu

The File menu contains a series of commands that pertain to the project.

Load From Database 

Select this topic to see information on Loading a CutArt From the Database.

Load

Select this topic to see information on Loading a Project file.

Save to Database

Select this topic to see information on Saving a CutArt to the Database.

Save CutArt

Select this topic to see information on Saving a CutArt file.

Save Path

Select this topic to see information on Saving a Path file.

Save DXF

Select this topic to see information on Saving a DXF file.

Save SVG

Select this topic to see information on Saving an SVG file.

Clear All

Select this topic to see information on Clearing Both the Design and Image from the editor.

Clear Design

Select this topic to see information on Clearing the Design from the editor.

Clear Image

Select this topic to see information on Clearing the Image from the editor.

Send to CMC

Select this topic to see information on Sending the Design to the Cut Preview Screen to cut.

Exit

Select this topic to see information on Exiting to the FrameShop main screen.

  • No labels