90 Degree Outside Cut |
|---|
Use the 90 Degree Outside Cut toggle to select the 90 Degree Cartridge when cutting the outside of the mat on the CMC 9000. The CMC 8000 does not have the capability to cut the outside with the 90 degree Cartridge. To select the 90 Degree Outside Cut for the CMC 9000z and Z1, see 90 Degree Outside Toggle in the Set Advanced Options. |
90 Degree Outside Cut On | |
|---|---|
Click the Outside Cut toggle to On in order to cut the outside of the mat with the 90 Degree cartridge. Click the 90° Outside Cut toggle to On to cut the outside of the mat with the 90 Degree cartridge. |  |
90 Degree Outside Cut Off | |
|---|---|
Click the 90° Outside Cuts toggle to Off to not cut the outside of the mat with the 90 Degree cartridge. When the Cut the Outside toggle is On, the outside will be cut with the 45 Degree cartridge. |  |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for the 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |