Enable Outside Cut: FrameShop Cut Preview Screen

Enable Cut the Outside

Select to Cut the Outside from this menu selection. Optionally, you could select the Cut Outside from the Outside Cut toggle.

Click the Set Advanced Options button to access the Advanced Outside Options.

Select the desired Outside Cut setting from the Enable Cut Outside toggle.

Click OK.

The CMC will cut the outside of the mat with the selected setting.

Click the Enable Outside Cut to On to cut the outside of the mat.

Click the Set Advanced Options button to access the Advanced Outside Options.

Select the Enable Cut Outside toggle to On.

Click OK.

The CMC will now cut the outside of the mat.

Click the Cut Outside Using 90 Degree Tool toggle to Off to use the 45 Degree Cartridge when cutting the outside.

Click the Set Advanced Options button to access the Advanced Outside Options.

Select the Enable Cut Outside toggle to Off.

Click OK.

The CMC will now not cut the outside of the mat.

Set the Default for Cutting the Outside
The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut
The default setting for 90 Degree Outside can be set in the Admin > Cutting section.