Curve Design Details: Trace

Curve Design Details
Click on a Curve to see the specific details about it. Curve Tool Definition The Curve function allows you to draw a mathematically defined four-point Curve in Trace. Full Definition: Curve Tool Definition
The Curve Design Details section displays information about the selected Curve.

Design Curve Details
Start X and Y Displays the Start X/Y Coordinates of the Curve’s start point when drawn. If you clicked on the upper left and drew by dragging to the lower right, that would make the start point in the upper left corner. X and Y Position The X Position field is used to set or display the Horizontal position of the selected object. The Y Position field is used to set or display the Vertical position of the selected object. Full Definition: X and Y Position Definition
Mid X1 and Y1 Displays the first Mid Point X1 and Y1 Coordinates.
Mid X2 and Y2 Displays the second Mid Point X2 and Y2 Coordinates.
End X and Y Displays the End Points X and Y Coordinates.
Bevel Type Displays the Bevel Type if the current object is Traced. Traced Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design.
Layer Displays the Layer this object is assigned to if the object is Traced.