">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

V-Groove Inside Cut has a Swoop

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

  • A Swoop is where the corners Curve Inward toward the opening on the inside/outside cut of the V-Groove.

    • If V-Groove Outside has a Swoop, Decrease the Outside Rotation.

    • If V-Groove Inside has a Swoop, Increase the Inside Rotation.

VGrooveExteriorInteriorSwoopArrows70800.png

Full Definition: Swoop on a V-Groove Definition

 How to Adjust the Inside or Outside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels