Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

Drive Belt Definition

  • The Drive Belt lays Horizontally at the top and the bottom of the Board and runs through the Gantry.

  • The Gantry is a spanning framework which attaches to the top and bottom of the Board and moves horizontally across it along the Drive Belt.

  • It is important that the Red Lines on the Drive Belt line up to the Red Lines on the Toothed Pulley on the Gantry, otherwise the Gantry would be crooked.

Connections:

  • The Drive Belt lays Horizontally at the top and the bottom of the Board and runs through the Gantry.

Troubleshooting:

  • If the cuts are crooked, check to make sure the Red Lines on the Drive Belt line up to the Red Lines on the Toothed Pulley on the Gantry.

  • The Drive Belt is becoming frayed.

See:

Z1BoardDriveBelt800.pngToothedBeltAnchorAndBelt800.png
  • No labels