">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 19 Next »

Load File Image

  • These instructions show how to Load a File Image into the Visualization software.

  • Default Settings:

  • See Admin > Defaults for the default settings for Loading Images.

  • See Admin > Editor for the default settings for the Camera Defaults.

  • See Admin > Editor for the default settings for the Wink Camera Defaults.

  • Click the Load File Image button to Load a File Image.

  • The Open File screen opens.

  • Click on the desired Image file.

  • Click Open to open the Image.

  • The Image file is opened into the Editor.

Pixels Per Unit

  • If the image file loaded is a different Size than the last file loaded, it will ask you to set the Scale using Pixels Per Unit (the current Unit of Measurement) for the Image.

  • If you are using Inches, it will be Pixels per Inch.

  • Enter the number of Pixels Per Inch and click OK.

  • Optionally, click the Set as Default checkbox to set this size as the default size.

 Pixels Per Inch Definition

Pixels Per Inch (PPI) describes Image Resolution which refers to the Number of Pixels contained within Each Inch of a Digital Image.

A Higher Resolution/PPI Image contains More Pixels and is a Higher Quality of Image.

A Lower Resolution/PPI Image contains Less Pixels and is a Lower Quality of Image.

To Calculate PPI:

Number of pixels ÷ size of the image in inches = Pixels Per Inch.

Substitute 1 cm for 1 Inch to find Pixels Per Centimeter or PPcm2.

  • No labels