Opening Adjustment on Crease

Opening Adjustment on Creases

How to Select the Bevel Type to Edit

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Adjustment for Crease Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Crease is Too Large, Decrease the Opening Adjustment.

How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Adjustment for Crease Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Crease is Too Small, Increase the Opening Adjustment.

How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

See Also: Opening Adjustment in the Troubleshooting Screen
If the Crease is Too Large, Decrease the Opening Adjustment. If the Crease is Too Small, Increase the Opening Adjustment. Enter the measured height and width of the opening into the appropriate fields and clicking the Calc Opening Adjustment button. Make sure that only a single opening is present on the screen, otherwise the Troubleshooting Button will be grayed out.