Deboss Wide Configurations

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Select the Deboss Tab on the Configurations screen.  

Select the Wide-Blue cartridge from the Cartridge dropdown control.

Problem:

• The Deboss-Wide is Applied to the Wrong Place Horizontally.

Resolution:

• Adjust the Horizontal Adjustment. Select this topic to adjust the Horizontal Adjustment.

• This is viewed from the front of the mat.

Problem:

• The Deboss-Wide is Applied to the Wrong Place Vertically.

Resolution:

• Adjust the Vertical Adjustment. Select this topic to adjust the Vertical Adjustment.

• This is viewed from the front of the mat.

Problem:

• The Deboss-Wide is the Wrong Size.

Resolution:

• Adjust the Opening Adjustment. Select this topic to adjust the Opening Adjustment.

• This is viewed from the front of the mat.

Problem:

• The Deboss-Wide is Applied at the Wrong Depth.

Resolution:

• Adjust the Depth Setting. Select this topic to adjust the Depth Setting.

Problem:

• Deboss-Wide Cartridge Tears the Mat.

Resolution:

• Adjust the Corner Pause. Select this topic to adjust the Corner Pause. 

Problem:

• The Deboss-Wide Lines are too Long.

Resolution:

• Adjust the Overshoot. Select this topic to adjust the Overshoot.

• This is viewed from the front of the mat.

Problem:

• The Deboss-Wide Lines are too Short.

Resolution:

• Adjust the Overshoot. Select this topic to adjust the Overshoot.

• This is viewed from the front of the mat.

Problem:

• The Deboss-Wide Set to Plunge Between Segments.

Resolution:

• Adjust the Plunge. Select this topic to adjust the Plunge between segments.

• Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.