Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 20 Next »

Exterior Overcut

The Exterior Overcut is where the cut continues into the corner before retracting the blade from the matboard on the exterior cuts, such as when cutting a rectangle. 

Exterior Cuts cut into the matboard, not the fallout of the opening.

Select the Bevel Type for the Exterior Overcut to be Edited:

Exterior Overcut on Openings

This is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Openings.

  • Normal Bevel

  • Reverse Bevel

  • Normal Bevel-Front of Mat

  • Reverse Bevel-Front of Mat

Exterior Overcut on Drops 

This is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Drops.

  • Normal Drop

  • Reverse Drop

  • Normal Drop-Front of Mat

  • Reverse Drop-Front of Mat

Exterior Overcut on the Outside

This is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on the Outside.

  • Outside

  • Outside-Front of Mat

Exterior Overcut on V-Grooves 

This is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on V-Grooves.

  • V-Grooves

Exterior Overcut on Crease

This is viewed from the front of the mat. Select this topic to see information on editing the Exterior Overcut on Creases.

  • Crease

  • No labels