This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Tolerance

The Tolerance is the total permissible variation of the curve optimization algorithm. The default setting is .2.

Using the Tolerance Setting

Load an image. 

Leave the Tolerance at the default value.

Click the Vectorize button.

There are a couple of places where the vectorization didn't match up with the edges of the design. 

Re-adjust the Tolerance number.

Click the Vectorize button again. 

You may have to play with the numbers to see what will work with your particular image. 

The outcome is closer to the edges of our specific image.

  • No labels