Page Comparison

Oval Rotation Definitions

Expand

title	Oval Rotation Definition

The Oval Rotation controls for Feathersor Bumpson an Oval Opening.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bumps Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation. Expand

title	Outside Oval Rotation on V-Grooves Definition

The Outside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Outside Cut of an Oval V-Groove. Expand

title	Outside V-Groove Feather Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

Expand

title	Outside V-Groove Bump Definition

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

Expand

title	Inside Oval Rotation on V-Grooves Definition

The Inside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Inside Cut of an Oval V-Groove. Expand

title	Inside V-Groove Feather Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

Expand

title	Inside V-Groove Bump Definition

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Select the Bevel Type to be Edited:

Oval Rotation on Openings

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Opening has a Feather or Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval

Opening has a Feather:Decrease the Oval

Rotation

. PanelpanelIconIdatlassian-notepanelIcon:note

:

bgColor#B3F5FF

Oval Opening has a Bump:

Increase theOval Rotation.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bumps Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Oval Rotation on Drops

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Drop has a Featheror Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Drops has a Feather:
- Decrease the Oval Rotation.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Drops has a Bump:

Increase theOval Rotation. Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation

Configurations Screen

Info
The Oval Rotation controls for Bumps or Feathers on an Oval

Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bumps Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Oval Rotation on Outside

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Outside has a Featheror Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Outside has a Feather:
- Decrease the Oval Rotation.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval Outside has a Bump:

Increase theOval Rotation.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bumps Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Oval Rotation on Oval V-Grooves

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Oval V-Groove has a Featheror Bump.

Resolution for Outside Oval V-Groove Cut:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Oval V-Groove has a Feather:
- Increase the Outside Oval Rotation.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Outside Oval V-Groove has a Bump:
- Decrease the Outside Oval Rotation.

Expand

title	Outside V-Groove Feather Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

Expand

title	Outside V-Groove Bump Definition

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Inside Oval V-Groove has a Featheror Bump.

Resolution for Inside Oval V-Groove Cut:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Inside Oval V-Groove has a Feather:
- Decrease the Inside Oval Rotation.

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Inside Oval V-Groove has a Bump:
- Increase the Inside Oval Rotation.

Expand

title	Inside V-Groove Feather Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

Expand

title	Inside V-Groove Bump Definition

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Expand

title	How to Adjust the Oval Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval V-Groove has aFeatheror Bump

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Troubleshooting Configurations to fine-tune for Bumps/Feathers in a V-Groove.

Expand

title	Feather V-Groove Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Feather, Increase the Outside Oval Rotation.

If the Inside Oval V-Groove cuts with a Feather, Decrease the Inside Oval Rotation.

Expand

title	Bump V-Groove Definition

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the V-Groove.

The Oval Rotation for V-Grooves controls for Bumpsor Featherson an Oval V-Groove.

If the Outside Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

If the Inside Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Image Removed

Problem:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Oval has aFeatheror Bump.

Resolution:

Panel

panelIconId	atlassian-note
panelIcon	:note:
bgColor	#B3F5FF

Use the Oval Rotation Utility to fine-tune Ovals.

Expand

title	Feather Definition

A Feather in an Oval Opening is a Fringe of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Feather, Decrease the Oval Rotation.

Expand

title	Bump Definition

A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.

The Oval Rotation controls for Bumps or Feathers on an Oval Opening.

If the Oval Opening cuts with a Bump, Increase theOval Rotation.

Image Removed

.

Versions Compared

Old Version 73

New Version 88

Key

Oval Rotation Definitions

Select the Bevel Type to be Edited:

Oval Rotation on Openings

Problem:

Resolution:

Oval

Rotation

:

Oval Rotation on Drops

Problem:

Resolution:

Configurations Screen

Oval Rotation on Outside

Problem:

Resolution:

Oval Rotation on Oval V-Grooves

Problem:

Resolution for Outside Oval V-Groove Cut:

Problem:

Resolution for Inside Oval V-Groove Cut:

See Also: Troubleshooting Utility for Ovals

Problem:

Resolution:

See Also: Oval Rotation Utility

Problem:

Resolution:

Contents: