Inside Oval Rotation for Oval V-Groove Definition

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the Oval V-Groove.
- If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

Feather on the Inside Cut of the V-Groove

Inside Oval Rotation for V-Grooves Configurations

See: Inside Oval Rotation for V-Grooves Configurations

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the Oval V-Groove.
- If the Inside cut of the Oval V-Groove has a Bump, Increase the Inside Oval Rotation.

A Bump in an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Outside or Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Bump, Increase the Inside Oval Rotation.

See: Inside Oval Rotation for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.