Opening Adjustment on Openings |
|---|
| Expand |
|---|
| title | How to Select the Bevel Type to Edit |
|---|
| Select desired Cartridge Tab. Select the desired Bevel Type from Current Bevel Type. Edit the desired Configuration field. |
| Expand |
|---|
| title | Cut from Front Full Definition |
|---|
| Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel - Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  Image RemovedImage Removed |
| Expand |
|---|
| title | How to Adjust the Opening Adjustment |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| Image Removed |
Opening Size too Big |
|---|
Contents:| Child pages (Children Display) |
|---|
| all | true |
|---|
| depth | 0 |
|---|
| allChildren | true |
|---|
| style | |
|---|
| sortAndReverse | |
|---|
| first | 0 |
|---|
|
|
Opening Adjustment.| Expand |
|---|
| title | Opening Adjustment for Openings Definition |
|---|
|
The controls the size of the Opening cut or Object applied with non-blade cartridges Large Decrease Image Removed
Image Removed| Expand |
|---|
title | Opening AdjustmentWhen adjusting , click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
Image RemovedImage Removed | Opening Size too Small |
|---|
| Expand |
|---|
| title | Opening Adjustment for Openings Definition |
|---|
| The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges. If the Opening is cut Too Small, Increase the Opening Adjustment. Image RemovedImage Removed |
| Expand |
|---|
| title | How to Adjust the Opening Adjustment |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
| Image RemovedImage Removed |
Opening Adjustment in the Troubleshooting Screen |
|---|
| Info |
|---|
Enter the measured height and width of the opening into the appropriate fields and clicking the Calc Opening Adjustment button. Make sure that only a single opening is present on the screen, otherwise the Troubleshooting Button will be grayed out.
|
| Image Removed | | How to Adjust the Configurations |
|---|
| name | How to Adjust Configurations |
|---|
| nopanel | true |
|---|
|
| Insert excerpt |
|---|
| Opening Adjustment Definition |
|---|
| Opening Adjustment Definition |
|---|
| name | Opening Adjustment Definition |
|---|
| nopanel | true |
|---|
|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
|  Image AddedImage Added |