Versions Compared

Old Version 56

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Rotation on V-Grooves Definition

Adjusting the V-Groove Rotation

Tip

  • To adjust, click Plus/Minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

Expand
titleOutside Rotation for V-Grooves Definition
The

Outside Rotation on

Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval

V-Grooves

. Expand
titleOutside Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut
Expand
titleOutside Flare Definition

  • If the Outside cut of the V-Groove

.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Outside cut of the
Image Removed

V-Groove Cutting Direction

Tip

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into Fallout, not the matboard.

  • Cuts Clockwise.

  • This uses the Inside Rotation.

Tip

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into Matboard, not the fallout.

  • Cuts Counter-Clockwise.

  • This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

Info
Groove has Swoops.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Outside Non-Oval
Swoop: ExpandtitleOutside V-Groove Cut
DefinitionNon-Oval

A Swoopin a
is where the corners Curve Inward toward the opening on either the
or Inside
of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Image RemovedV-Groove Outside
Problem:

Panel
panelIconId
atlassian-note
1f9d9-200d-2642-fe0f
panelIcon:
note
man_mage:
bgColor#B3F5FF

  • Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleOutside V-Groove Cut Flare Definition

A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.

The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Image Removed

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Outside Non-Oval V-Groove has a Swoop or Flare.

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Expand
titleOutside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

Expand
titleOutside Swoop Definition
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Expand
titleOutside Flare Definition
A Flare
panelIconText🧙‍♂️
bgColor#FFFAE6

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove

is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.

If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

Image Removed

  • .

Image AddedImage AddedImage Added