Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
|  Image Removed |
Rotation on V-Grooves Definition |
|---|
Adjusting the V-Groove Rotation
| Tip |
|---|
To adjust, click plus/minus on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
| Expand |
|---|
| title | Outside Rotation for V-Grooves Definition |
|---|
|
The Non-Oval controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.| Expand |
|---|
| title | Outside Swoop Definition |
|---|
|
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut .The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut | Expand |
|---|
| title | Outside Flare Definition |
|---|
|
.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with Image Removed | V-Groove Cutting Direction |
|---|
| Tip |
|---|
First Cut of V-Groove: Cuts the Interior V-Groove Line. Cuts into fallout, not the matboard. Cuts clockwise. This uses the Inside Rotation.
|
| Tip |
|---|
Second Cut of V-Groove: Cuts the Exterior V-Groove Line. Cuts into matboard, not the fallout. Cuts counter-clockwise. This uses the Outside Rotation.
|
|
V-Groove Outside has a Swoop |
|---|
Problem:
Resolution:
| Expand |
|---|
| title | Outside V-Groove Cut Swoop Definition |
|---|
|
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.
Image Removed | V-Groove Outside has a Flare |
|---|
Problem:
Resolution:
| Expand |
|---|
| title | Outside V-Groove Cut Flare Definition |
|---|
|
A Flare in a Non-Oval V-Groove is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.
The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.
Image Removed | See Also: Troubleshooting Utility for Non-Oval V-Grooves |
|---|
Problem:
Resolution:
| Expand |
|---|
| title | Outside Swoop Definition |
|---|
|
A Swoopin a Non-Oval V-Groove is where the corners Curve Inward toward the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.
| Expand |
|---|
| title | Outside Flare Definition |
|---|
|
A Flare | Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
|
is where the corners Curve Away from the opening on either the Outside or Inside Cut of the V-Groove.The Rotation on Non-Oval V-Grooves controls for Swoopsor Flares on Non-Oval V-Grooves.If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.
Image Removed |  Image Added Image Added Image Added |