Cartridges Involved |
|---|
This Configuration element involves the following Cartridges. | Info |
|---|
Note: Not all cartridges are available for all CMC models. |
|  Image Removed |
Outside Rotation on V-Grooves |
|---|
Definition| Tip |
|---|
Second Cut of V-Groove:
Cuts the Exterior V-Groove Line.
Cuts into matboard, not the fallout.
Cuts counter-clockwise.
This uses | Info |
|---|
The Outside Rotation controls for Swoopsor Flareson the outside cut on non-oval V-Grooves.| Tip |
|---|
First Cut of V-Groove: Cuts the Interior V-Groove Line. Cuts into fallout, not the matboard. Cuts clockwise. This uses the Inside Rotation.
|
Problem:
Resolution:
Image Removed| Info |
|---|
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
Image RemovedImage RemovedImage Removed | V-Groove Outside has a Swoop |
|---|
FlareProblem:
The Outside cut of the non-oval .See Also: Troubleshooting Utility for Non-Oval V-Grooves |
|---|
Problem:
Resolution:
Use the Troubleshooting Configurations to fine-tune for Swoop/Resolution:
Image Removed| Info |
|---|
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
Image Removed | | panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
|
Image Removed Image Added Image Added Image Added |