Versions Compared

Old Version 4

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change to the 45 Plus Degree Blade Cartridge

Info

  • The 45°+ Cartridge cuts the Bevel Angle on the thicker matboard at 45°.

    • The 45°+ Blade Cartridge supports Blade Depths above 16.

  • The Black 45°+

black metal blade cartridge* is labeled + on the

  • Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.

    • *Older systems may have a 45°+

yellow plastic cartridge

    • Yellow Plastic Blade Cartridge. 

Image RemovedPush blade cartridge release

End45PlusCartridge70800.pngImage Added
Info

  • Your hardware may look different than the model pictured, but the process is still the same.

  • Push the Blade Cartridge release lever down to eject the

current blade cartridge.Turn 45 Plus degree cartridge over and reinsert into the head with the blade facing the CMC board

  • Blade Cartridge.

Image Added

  • Insert the new Cartridge into the Head with the Blade facing toward the Board and the notch on the back of the

cartridge

  • Cartridge facing the

head, until it clicks

  • Head.

  • It should click into place.

    • It can only be inserted one way.

Image Removed
Image Added