Cut the Outside As Designed: Cut Preview Outside Cut Options | |
|---|---|
| |
|
|
|
Select As Designed from the Outside Cut Options dropdown control to cut the outside as originally designed.
|
Advanced Outside Options
On the Advanced Outside Options screen, set the Cut Mode to As Designed. The Cut Mode matches the selections from the Outside Cut Options as described above.
This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.
Set the Default for Cutting the Outside
The default setting for Cutting the Outside can be set in the Admin > Editor section.
Set the Default for 90 Degree Outside Cut
The default setting for 90 Degree Outside can be set in the Admin > Cutting section.
Set the Default for the Advanced Options
The default setting for the Advanced Options can be set in the Admin > Cutting section.
Set the Default for the Cut Mode
The default setting for the Cut Mode can be set in the Admin > Cutting section.
|  |