Cartridges Involved |
---|
This Configuration element involves the following Cartridges. Info |
---|
Note: Not all cartridges are available for all CMC models. |
| Image Removed |
Outside Rotation on V-Grooves |
---|
Definition Tip |
---|
Second Cut of V-Groove:
Cuts the Exterior V-Groove Line.
Cuts into matboard, not the fallout.
Cuts counter-clockwise.
This uses Info |
The Outside Rotation controls for Swoopsor Flareson the outside cut on non-oval V-Grooves. Tip |
---|
First Cut of V-Groove: Cuts the Interior V-Groove Line. Cuts into fallout, not the matboard. Cuts clockwise. This uses the Inside Rotation.
|
Problem:
Resolution:
Image Removed Info |
---|
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
Image RemovedImage RemovedImage Removed | V-Groove Outside has a Swoop |
FlareProblem:
The Outside cut of the non-oval .See Also: Troubleshooting Utility for Non-Oval V-Grooves |
---|
Problem:
Resolution:
Use the Troubleshooting Configurations to fine-tune for Swoop/Resolution:
Image Removed Info |
---|
To adjust, click plus/minus on the field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|
Image Removed | panelIconId | 1f9d9-200d-2642-fe0f |
---|
panelIcon | :man_mage: |
---|
panelIconText | 🧙♂️ |
---|
bgColor | #FFFAE6 |
---|
| |
|
Image RemovedImage AddedImage AddedImage Added |