Cartridges Involved |
---|
This Configuration element involves the following Cartridges. Info |
---|
Note: Not all cartridges are available for all CMC models. |
| Image Removed |
Outside Rotation on V-Grooves |
---|
DefinitionImage Removed | See Also: Troubleshooting Utility for Non-Oval V-Grooves |
---|
Problem:
Resolution:
Use the Troubleshooting Configurations to fine-tune for Swoop/ Info |
The Outside Rotation controls for Swoopsor Flareson the outside cut on non-oval V-Grooves. Tip |
---|
First Cut of V-Groove: Cuts the Interior V-Groove Line. Cuts into fallout, not the matboard. Cuts clockwise. This uses the Inside Rotation.
|
Tip |
---|
Second Cut of V-Groove: Cuts the Exterior V-Groove Line. Cuts into matboard, not the fallout. Cuts counter-clockwise. This uses the Outside Rotation.
|
Image RemovedImage Removed | V-Groove Outside has a Swoop |
---|
Problem:
Resolution:
Image Removed Info |
---|
When making adjustments, click the plus or minus button at the end of the desired field about four times. In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.
|
Image Removed | V-Groove Outside has a Flare |
---|
Problem:
Resolution:
Image Removed Info |
---|
When making adjustments, click the plus or minus button at the end of the desired field about four times. In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.
|
Panel |
---|
panelIconId | 1f9d9-200d-2642-fe0f |
---|
panelIcon | :man_mage: |
---|
panelIconText | 🧙♂️ |
---|
bgColor | #FFFAE6 |
---|
| |
|
Image RemovedImage AddedImage AddedImage Added |