Page Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image Removed

Outside Rotation on V-Grooves

Definition

Problem:

The Non-Oval V-Groove cuts with a Swoop/Flare.

Resolution:

Use the Troubleshooting Configurations to fine-tune for Swoop/

InfoThe Outside Rotation controls for Swoopsor Flareson the outside cut on non-oval V-Grooves.

Tip

First Cut of V-Groove:

Cuts the Interior V-Groove Line.
Cuts into fallout, not the matboard.
Cuts clockwise.
This uses the Inside Rotation.

Second Cut of V-Groove:

Cuts the Exterior V-Groove Line.
Cuts into matboard, not the fallout.
Cuts counter-clockwise.
This uses the Outside Rotation.

Image Removed

V-Groove Outside has a Swoop

Problem:

The Outside cut of the non-oval V-Groove has Swoops.

Image Removed

Resolution:

Decrease the Outside Rotation.

Info
When making adjustments, click the plus or minus button at the end of the desired field about four times. In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image Removed

V-Groove Outside has a Flare

Problem:

The Outside cut of the non-oval V-Groove has Flare.

Image Removed

Resolution:

Increase the Outside Rotation value.

Info
When making adjustments, click the plus or minus button at the end of the desired field about four times. In Rotation, eight points equals one degree of rotation. Users usually make adjustments four points at a time. Click OK and do another test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved.

Image Removed

If the Outside cut of the V-Groove has a Swoop, Decrease the Outside Rotation.
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.

Info
See: Rotation on Non-Oval V-Grooves V-Groove Outside Cut has a Swoop V-Groove Outside Cut has a Flare

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.

Image Removed

Image Added

Versions Compared

Old Version 37

New Version Current

Key

Cartridges Involved

Outside Rotation on V-Grooves

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

Resolution:

V-Groove Outside has a Swoop

Problem:

Resolution:

V-Groove Outside has a Flare

Problem:

Resolution: