Page Comparison

Tip
Default Settings: See Admin > Editor to set the default of whether or not to Cut the Outside.

Expand

title	Auto Offset Definition

The Auto Offset moves the design up and over on the Cut Preview to avoid the Clamparea.

This is to overcome the Border Limitation of 1.25"/3.2 cm on the Cut Preview.

Image Removed

See: Auto Offset Setting

See: Auto Offset Definition

See: Auto Offset Default Setting

Image Removed

The Uncuttable Region on Designs That are Too Big

Info
If a design is Too Big to cut, the Uncuttable Region is displayed as a Checkerboard Pattern along the sides that are too big.

Info
The Z1 and Z(9000z) will not display an uncuttable region because of the zero waste clamping system unless the matboard dimensions entered are larger than the machine can physically cut.

Image Removed

Add Float Layer

Adding a Float Layer

Select the Add Float Layer to add a Float Layer.
The bottom layer is now set as a Float Layer without an opening.

Expand

title	Float Layer Definition

A Float Layer is a designated bottom layer that contains No Openings which can be used to adhere three-dimensional objects.

This layer will not cut unless Cut the Outside is selected.

Image Removed

Removing a Float Layer

Unselect Add Float Layer.
The bottom Float Layer is removed.

Image Removed

Oval Outside

Click Oval Outside to cut the outside as an oval.

Info
The area beyond the oval boundary is displayed in lighter contrasting color. Selecting Oval Outside will automatically select Cut the Outside.

Image Removed

Rectangle Outside

Unselect Oval Outside to cut the outside as a rectangle.

Image Removed

Frames and Fillets SKUs

Info
Use the Frames and Fillets section to select the SKU of the desired frame.

Select the Number of Frames.
Enter the desired SKU Numbers for each frame.

Info
Optionally, click on the SKU Search (magnifying glass) button to open the Frames Fillets and Ready Mades search screen to locate the desired SKU. If the selected SKU has a Thumbnail Associated With It, the frame/fillet is displayed around the mat design. If no Thumbnail is available, a gray placeholder the thickness of the moulding is displayed around the matboard.

Tip
Default Settings: See Admin > Subscription for the default settings for Subscribing to Vendors. See Admin > Vendors for the default settings for Vendors you are Subscribed to. See Admin > Frames for the default settings for Frame Records for Vendors you are Subscribed to.

Expand

title	SKU Definition

Subscribing to the specific Vendors allows you to select the desired SKU (Stock Keeping Unit) for Frames, Fillets and Mats in Designer and Visualize.

If you are not Subscribed to the Vendor, their SKUs will not be displayed/selectable.

Image Removed

See: Subscription Definition

Image Removed

Mats and Fillets

Info
Use the Mats and Fillets section to select the SKU of the desired mats.

Select the Number of Mats.
Enter the desired SKU Numbers for each mat.

Info
Optionally, click on the SKU Search (magnifying glass) button to open the Mats and Fillets search screen to locate the desired SKU. If the selected SKU has a Thumbnail Associated With It, the matboard texture or color is displayed on the mat. If no Thumbnail is available, a checkerboard pattern is displayed.

Tip
Default Settings: See Admin > Subscription for the default settings for Subscribing to Vendors. See Admin > Vendors for the default settings for Vendors you are Subscribed to. See Admin > Mats for the default settings for Mat Records for Vendors you are Subscribed to.

Expand

title	SKU Definition

Subscribing to the specific Vendors allows you to select the desired SKU (Stock Keeping Unit) for Frames, Fillets and Mats in Designer and Visualize.

If you are not Subscribed to the Vendor, their SKUs will not be displayed/selectable.

Image Removed

See: Subscription Definition

Image Removed

Change Frame or Mat Layer Order

Info
Change the Layer Order of the currently selected SKUs in either the Frame or Mat section by dragging the SKUs to the desired position.

Click and hold the mouse on the desired Frame or Mat SKU field.
Drag it up or down to switch places with the adjacent SKU field.
The cursor will display a small arrow and rectangle as you move the fields. Release the mouse to place the field into position.
The SKUs entered will change positions.

Image Removed

Additional Info

Add any desired notes you wish to save with the project in the Additional Info field.

Info
These notes will be displayed on the Additional Info pane on the Cutting Preview screen and on the Browse screen under Notes.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:
See Displaying Additional Info on the Cut Preview.

Image Removed

Matboard Properties

Info
Use the Matboard Properties to edit the individual proprietary adjustments available for the matboard.
Click on

the Matboard (not on an object).Click

the Matboard to select it and click on the Properties Tab

.

Edit the individual proprietary adjustments available for the matboard.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information: to edit it.
- Optionally, Right-Click on the matboard and select Mat Properties to open the Matboard Properties.

Image Removed

Dimensions

Enter the Matboard Width dimension.
Enter the Matboard Height dimension.

Tip
Default Settings: See Admin > Editor to set the default settings for the Outside and Opening Sizes.

Expand

title	Sizes Button Definition

The Sizes Button displays the Recent and Standard sizes.

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

Image Removed

Expand

title	Swap Button Definition

The Swap Button switches the values between the width and height fields.

Image Removed

Cut the Outside

Cutting the Outside

Select Cut the Outside to cut the outside of the mat.

Info
When Cut the Outside is selected, the matboard displays as a Solid Color.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat. See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.

See Cut Mode in the Set Advanced Options section on the Cut Preview.

See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Tip
Default Settings: See Admin > Editor to set the default of whether or not to Cut the Outside.

Expand

title	Outside Bevel Definition

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

Image Removed

Not Cutting the Outside

Unselect the Cut the Outside to not cut the outside of the mat.

Info

Unchecking Cut the Outside displays the 1.5 inch (3.8cm) Uncuttable Region in a checkerboard pattern. The uncuttable region is the portion of the matboard that is placed into the CMC rails when cutting.
The Z1 and Z(9000z) will not display an uncuttable region because of the zero waste clamping system, unless the matboard dimensions entered are larger than the machine can physically cut (see The Uncuttable Region on Designs That are Too Big below).
Do not place objects into the uncuttable region unless you select Cut the Outside or use the Auto Offset.

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat. See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.See Cut Outside Using 90 Degree Tool under Set Advanced Optionson the Cut Preview.

See Cut Mode in the Set Advanced Options section on the Cut Preview.

See Remnant Trimming in the Set Advanced Options section on the Cut Preview.

Use the Matboard Properties to edit the individual proprietary adjustments available for the Matboard.

Versions Compared

Old Version 37

New Version 48

Key

The Uncuttable Region on Designs That are Too Big

Add Float Layer

Adding a Float Layer

Removing a Float Layer

Oval Outside

Rectangle Outside

Frames and Fillets SKUs

Mats and Fillets

Change Frame or Mat Layer Order

Additional Info

Matboard Properties

Dimensions

Cut the Outside

Cutting the Outside

Not Cutting the Outside

Contents: