The 45° Front Reverse Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface. The , hiding the matboard core is not visible from the front.
The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
The copper 45° Front Blade Cartridge is labeled “45°” with a 45° Angle Symbol and a TriangleSymbol on the end.
The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.
Select Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
Image Added
Excerpt
hidden
true
name
45 Degree Front Reverse Bevel Opening
The 45° Front Reverse Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface. The , hiding the matboard core is not visible from the front.
The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.
