Page Comparison

...

To Rotate the Starburst in Trace:

Click Ctrl + A to select all objects on the design. Optionally, click Edit > Select All.
Click the Edit radio button on the Trace and Draw Tab.
On the Rotate Degrees field, enter 30*.

Info
See Determining the Degree of Rotation* for information on how to determine the optimum degree of rotation for your particular CutArt.

Insert excerpt

Rotation of Objects in Trace

name

Rotation of Objects in Trace Definition

Click the Left < Rotate button.
The CutArt will Rotate.
Turn on the Dynamic Outsides if the rotated CutArt falls outside the edges of the mat.

Insert excerpt

	Rotation of Objects in Trace
	Rotation of Objects in Trace
name	Rotation of Objects in Trace Definition

Insert excerpt

	Dynamic Outsides
	Dynamic Outsides
name	Dynamic Outsides Definition

Save the CutArt.
You will get a message stating that this design contains objects that do not have an assigned Bevel Type.
- This refers to the Alignment Lines and Arcs that we didn't Trace.
Click Yes that you wish to continue.
The CutArt is saved.
Load the CutArt into the Design editor.
Cut the CutArt.

Info
Since it is a Deboss design, you can also size it much smaller if desired without worrying about Overcuts and Backups Optionally, you can also bring the CutArt straight to the Cut Preview from Trace. The Starburst design is completed.

Insert excerpt

Insert excerpt

...