changes.mady.by.user dani.simmonds
Saved on yesterday at 4:59 pm
Saved on yesterday at 5:08 pm
The 45°+ Cartridge cuts the Bevel Angle on the thicker matboard at 45°.
The 45°+ Blade Cartridge supports Blade Depths above 16.
The Black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.
*Older systems may have a 45°+ Yellow Plastic Blade Cartridge.
Your hardware may look different than the model pictured, but the process is still the same.
Push the Blade Cartridge release lever down to eject the Blade Cartridge.
Insert the new Cartridge into the Head with the Blade facing toward the Board and the notch on the back of the Cartridge facing the Head.
It should click into place.
It can only be inserted one way.
