Versions Compared

Version Old Version 22 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Crease Cartridge Configurations

Info

  • The Crease Cartridge creases the material to make folding it easier when making Boxes.

  • This is viewed from the front of the mat.

Image Removed

Crease Tab

  • Select the Deboss Tab on the Configurations screen. 

  • Select the Crease Cartridge.

Tip

  • Crease Cartridge

Image RemovedCrease Exterior
The

Contents:

Problem:

Exterior
Long.
Expand
titleExterior Backup Definition

The Exterior Backup controls where the blade plunges into the matboard on the exterior cut. 

Resolution:

  • Decrease the Exterior Backup.

  • See Exterior Backup for additional information.

Image RemovedCrease Exterior Backup is too

Problem:

  • The Crease Exterior Backup is too Short.

Expand
titleExterior Backup Definition

The Exterior Backup controls where the blade plunges into the matboard on the exterior cut. 

Resolution:

Increase the Exterior Backup.

  • See Exterior Backup for additional information.

    • Image Removed
    Exterior The

    Problem:

    Exterior
    applied
    Long.
    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on the exterior cuts.

    Resolution:

  • Decrease the Exterior Overcut.

    • See Exterior Overcutfor additional information.Image Removed

    Crease Exterior Overcut is too Short

    Problem:

    The Crease Exterior Overcut is applied too
    .
    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on the exterior cuts.

    Resolution:

    Increase the Exterior Overcut.

  • See Exterior Overcut for additional information.

    • Image Removed

    Problem:

    applied at the Wrong Size.
    Expand
    titleOpening Adjustment Definition

    The Opening Adjustment controls the size of the opening.

    Resolution:

    • If cut too small, increase the Opening Adjustment.

    • If cut too large, decrease the Opening Adjustment.

    • See Opening Adjustment for additional information.

    Image RemovedCrease is
    SKU

    Problem:

    • The Crease is applied at the Wrong Depth When Using a SKU.

    Expand
    titleDepth Bias Definition
    The Depth Bias calculates the proper Blade Depth when a 
     is selected for the matboard.Resolution:

    Set Box Defaults

    Info

    • Set up the Box Defaults for the Crease cartridge in the Admin Editor section of the software.

    Image Removed

    • Cut too shallow, increase the Depth Bias.

    • Cut too deep, decrease the Depth Bias.

    • See Depth Bias for additional information.

    Image Removed

    Troubleshooting Button 

    Info

    • Select this topic to see information on editing with the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

    Image Removed
    Insert excerpt
    Crease Cartridge
    Crease Cartridge
    nameCrease Cartridge