Versions Compared

Version Old Version 21 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Crease Cartridge Configurations

Info

  • The Crease Cartridge creases the material to make folding it easier when making Boxes.

  • This is viewed from the front of the mat.

Image Removed

Crease Tab

  • Select the Deboss Tab on the Configurations screen. 

  • Select the Crease Cartridge.

Tip

  • Crease Cartridge

Image Removed

Crease Exterior Backup is too Long

Problem:

  • The Crease Exterior Backup is too Long.

Expand
titleExterior Backup Definition

The Exterior Backup controls where the blade plunges into the matboard on the exterior cut. 

If the Exterior Backup is too short, it can leave a hook in the corner.

Exterior Backup cuts into the matboard, not the fallout.

The Exterior Backup field is marked with a Green Arrow.

Resolution:

  • Decrease the Exterior Backup.

  • See Exterior Backup for additional information.

Image Removed

Crease Exterior Backup is too Short

Problem:

  • The Crease Exterior Backup is too Short.

Expand
titleExterior Backup Definition

The Exterior Backup controls where the blade plunges into the matboard on the exterior cut. 

If the Exterior Backup is too short, it can leave a hook in the corner.

Exterior Backup cuts into the matboard, not the fallout.

The Exterior Backup field is marked with a Green Arrow.

Resolution:

  • Increase the Exterior Backup.

  • See Exterior Backup for additional information.

Image Removed

Crease Exterior Overcut is too Long

Problem:

  • The Crease Exterior Overcut is applied too Long.

Expand
titleExterior Overcut Definition

The Exterior Overcut controls where the blade retracts from the matboard on the exterior cuts.

Exterior Overcut cuts into the matboard, not the fallout.

The Exterior Overcut field is marked with a Red Arrow.

Resolution:

  • Decrease the Exterior Overcut.

    • See Exterior Overcutfor additional information.Image Removed

    Crease Exterior Overcut is too Short

    Problem:

    • The Crease Exterior Overcut is applied too Short.

    Expand
    titleExterior Overcut Definition

    The Exterior Overcut controls where the blade retracts from the matboard on the exterior cuts.

    Exterior Overcut cuts into the matboard, not the fallout.

    The Exterior Overcut field is marked with a Red Arrow.

    Resolution:

    • Increase the Exterior Overcut.

    • See Exterior Overcut for additional information.

    Image Removed

    Crease is the Wrong Size

    Problem:

    • Crease is applied at the Wrong Size.

    Expand
    titleOpening Adjustment Definition

    The Opening Adjustment controls the size of the opening.

    Resolution:

    • If cut too small, increase the Opening Adjustment.

    • If cut too large, decrease the Opening Adjustment.

    • See Opening Adjustment for additional information.

    Image Removed

    Contents:

    Problem:

    Set Box Defaults

    Info

    • Set up the Box Defaults for the Crease cartridge in the Admin Editor section of the software.

    Image Removed

    • The Crease is applied at the Wrong Depth When Using a SKU.

    Expand
    titleDepth Bias Definition

    The Depth Bias calculates the proper Blade Depth when a SKU is selected for the matboard.

    Resolution:

    • Cut too shallow, increase the Depth Bias.

    • Cut too deep, decrease the Depth Bias.

    • See Depth Bias for additional information.

    Image Removed

    Troubleshooting Button 

    Info

    • Select this topic to see information on editing with the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

    Image Removed
    Insert excerpt
    Crease Cartridge
    Crease Cartridge
    nameCrease Cartridge