Versions Compared

Version Old Version 20 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Info

Note: Not all cartridges are available for all CMC models.

Image Removed

Crease Cartridge Configurations

Info

  • The Crease Cartridge creases the material to make folding it easier when making Boxes.

  • This is viewed from the front of the mat.

Image Removed

Crease Tab

  • Select the Crease Cartridge.

Image Removed

Crease Exterior Backup is too Long

Problem:

  • The Crease Exterior Backup is too Long.

Resolution:

  • Decrease the Exterior Backup.

  • See Exterior Backup for additional information.

Info

  • The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Image Removed

Crease Exterior Backup is too Short

Problem:

  • The Crease Exterior Backup is too Short.

Resolution:

  • Increase the Exterior Backup.

  • See Exterior Backup for additional information.

Info

  • The Exterior Backup controls where the blade plunges into the matboard on exterior cuts.

Image Removed

Crease Exterior Overcut is too Long

Problem:

  • The Crease Exterior Overcut is applied too Long.

Resolution:

  • Decrease the Exterior Overcut.

    • See Exterior Overcutfor additional information.

    Info

    • The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Image Removed

    Crease Exterior Overcut is too Short

    Problem:

    • The Crease Exterior Overcut is applied too Short.

    Resolution:

    • Increase the Exterior Overcut.

    • See Exterior Overcut for additional information.

    Info

    • The Exterior Overcut controls where the blade retracts from the matboard on exterior cuts.

    Image Removed

    Crease is the Wrong Size

    Problem:

    • Crease is applied at the Wrong Size.

    Resolution:

    • If cut too small, increase the Opening Adjustment.

    • If cut too large, decrease the Opening Adjustment.

    • See Opening Adjustment for additional information.

    Info

    • The Opening Adjustment controls the size of the opening.

    Image Removed

    Contents:

    SKU

    Problem:

    • The Crease is applied at the Wrong Depth When Using a SKU.

    Resolution:

    • Cut too shallow, increase the Depth Bias.

    • Cut too deep, decrease the Depth Bias.

    • See Depth Bias for additional information.

    InfoThe Depth Bias calculates the proper Blade Depth when a 
     is selected for the matboard.Image Removed
    Button 

    Set Box Defaults

    Info

    • Set up the Box Defaults for the Crease cartridge in the Admin Editor section of the software.

    Image Removed
    Info

    • Select this topic to see information on editing with the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

    Image Removed
    Insert excerpt
    Crease Cartridge
    Crease Cartridge
    nameCrease Cartridge