Versions Compared

Old Version 20

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 22

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Configurations

Info

  • Use the Configurations Screen to make adjustments to either how the CMC cuts or how it applies the non-bladed cartridges.

  • Below is a list of support documentation for the Configurations Screen of the FrameShop software. Select which approach you want to take in identifying the cutting issue and resolving it by editing the Configurations.

Select the Configurations Cartridge Type to Edit

Select this topic for information on the Cartridge Type Tabs.

Expand
titleCartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Image Removed

Bevel Type

Select this topic for information on the Bevel Types available from the Bevel Type dropdown control.

Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Image Removed

Select the Configurations Section to Edit

Select this topic for information on the Configurations Section you want to edit.

Expand
titleCalibration Definition

Calibration is the process of using the Configurations screen to make adjustments to the CMC to ensure that it is cutting the Right Size, in the Correct Position, the Corners are Precise, and there are no Swoops, Flares, Bumps or Feathers.

Image Removed

Select the Configurations Field to Edit

Select this topic for information on the specific Configuration Fields.

Expand
titleCalibration Definition

Calibration is the process of using the Configurations screen to make adjustments to the CMC to ensure that it is cutting the Right Size, in the Correct Position, the Corners are Precise, and there are no Swoops, Flares, Bumps or Feathers.

Image Removed

Troubleshooting

Select this topic for information on the Troubleshooting utility to quickly edit the configurations for a single object.

Expand
titleTroubleshooting Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

Image Removed

Quick Calibration

Select this topic to see information about the Quick Calibration which walks through making sure the opening is the right size, cut in the right place, as well as adjust the backups and overcuts and correct for swoops and flares.

Expand
titleCalibration Definition

Calibration is the process of using the Configurations screen to make adjustments to the CMC to ensure that it is cutting the Right Size, in the Correct Position, the Corners are Precise, and there are no Swoops, Flares, Bumps or Feathers.

Image Removed

Contents:

Child pages (Children Display)
allChildrentrue
Image Added