Enable Cut the Outside | ||
---|---|---|
Select whether to Cut the Outside | from with this | menu selectiontoggle selection for the CMC Z1 and Z (9000z). Optionally, you could select the Cut Outside from the Outside Cut toggle. |
Set Advanced Options: Cut the Outsideusing 90 Degree Tool | |
---|---|
Click the Set Advanced Options button to access the Advanced Outside Options. | |
Select the desired Outside Cut setting from the Enable Cut Outside toggle. Click OK. The CMC will cut the outside of the mat with the selected setting. |
Enable Outside Cut On | ||
---|---|---|
Click the Enable Outside Cut to On to cut the outside of the mat. | ||
Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. | ||
Select the Enable Cut Outside toggle to On. Click OK. The CMC will now cut the outside of the mat. | 90 Degree Cartridge Toggle |
Enable Outside Cut Off | |||
---|---|---|---|
Click the | Cut Outside Using 90 Degree Tool toggle to Off to use the 45 Degree Cartridge when cutting the outsideEnable Outside Cut to Off to not cut the outside of the mat. | ||
Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. | |||
Select the Enable Cut Outside toggle to Off. Click OK. The CMC will now not cut the outside of the mat. |
Cut the Outside Toggle | |
---|---|
Optionally, select this topic to see information on the Cut the Outside Toggle. |
Set the Default for Cutting the Outside | |
---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |
Set the Default for 90 Degree Outside Cut | |
---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |