Versions Compared

Old Version 19

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change to the 45 Plus Degree Blade Cartridge

Info

  • The black 45°+ Black Metal Blade Cartridge* is designed to cut 45° bevels on thicker matboard, such as 8-ply matboard.

  • The 45°+ Blade Cartridge is labeled 45°+ on the end.

  • Notes:

    Your hardware may look different than the model pictured, but the process is still the same

    labeled with a 45° Angle Symbol and Plus Symbol on the end.

  • The 45°+ Blade Cartridge

    support

    supports Blade Depths above 16.

    • *Older systems may have a 45°+ Yellow Plastic Blade Cartridge. 

Image RemovedEnd45PlusCartridge70800.pngImage Added

  • Push the Blade Cartridge release lever down to eject the Blade Cartridge.

  • Insert the new Cartridge into the Head with the Blade facing toward the Board and the notch on the back of the Cartridge facing the Head.

  • It should click into place.

    • It can only be inserted one way.