Page Comparison

• the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the

• V-Groove. The initial plunge position is determined by the bevel type.

• The

• Interior

• Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

  • If the Interior Overcut on the Inside Cut of the

• • V-Groove is cut Too Long, Decreasethe Interior Overcut on V-Grooves.

  • If the Interior Overcut on the Inside Cut of the

• • V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.

the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the

V-Groove. The initial plunge position is determined by the bevel type.

The

Interior

Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

If the Interior Overcut on the Inside Cut of the

V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves.

If the Interior Overcut on the Inside Cut of the

V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves

.

The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.

Image Added

Image Added

See: V-Groove Interior Overcut

Configurations