the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The initial plunge position is determined by the bevel type.
The
V-Groove
Interior
Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.
Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decreasethe Interior Overcut on V-Grooves.
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.
Expand
title
V-Groove Interior Overcut Full Definition
The V-Groove Interior Overcut controls where
the Blade
the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The initial plunge position is determined by the bevel type.
The
V-Groove
Interior
Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.
Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves.
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves
