Versions Compared

Old Version 15

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

See Trace Lesson Eleven: Starburst for the First Half of This Lesson.

note:
panelIconIdatlassian-note
panelIcon

To Rotate the Starburst in Trace:

Panel

:

bgColor#B3F5FF
Info

*See Determining the Degree of Rotation for information on how to determine the optimum degree of rotation for your particular CutArt.

Expand
titleRotate Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Image Removed
Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF
Click the 

Insert excerpt
Rotation of Objects in Trace
Rotation of Objects in Trace
nameRotation of Objects in Trace Definition
Image Added

  • Click the Left < Rotate button.

  • The CutArt will Rotate.

Expand
titleRotate Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl

  • Turn on the Dynamic Outsides if the rotated CutArt falls outside the edges of the mat.

panelIconId
 You

  •  

  • You will get a message stating that this design contains objects that do not have an assigned Bevel Type.

    • This refers to the Alignment Lines and Arcs that we didn't Trace.

  • Click Yes that you wish to continue.

 

Trace, Save, Cut

Panel

atlassian-info
panelIcon:info:
bgColor#B3F5FF
Info

  • Since it is a Deboss design, you can also size it much smaller if desired without worrying about Overcuts and Backups

  • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

  • The Starburst design is completed.

Expand
titleBevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand
titleDeboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed
Insert excerpt
CutArt™ Definition
CutArt™ Definition
nameCutArt Definition
Insert excerpt
Deboss Cartridge
Deboss Cartridge
nameDeboss Cartridge
Image Added
Image Removed

Comparison

  • You can see how much we changed the design when you compare it to what we started with.

  • You can alter the design greatly by changing the number of sides of the template, selecting a different template, changing the CutArt placed, and even the number of degrees of rotation when you place it on the Editor. 

Image Removed

Image AddedImage Added