Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Enable Cut the Outside

Select whether to Cut the Outside with this toggle selection for the CMC Z1 and Z (9000z). Optionally, you could select the Cut Outside from the Outside Cut toggle.

...

Cut the Outside Toggle

Enable Outside Cut Off

Click the Enable Outside Cut to Off to not cut the outside of the mat.

Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options

Select the Enable Cut Outside toggle to Off.  

Click OK.

The CMC will now not cut the outside of the mat.

Cut the Outside Toggle

Optionally, select this topic to see information on the Cut the Outside Toggle.

Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Set the Default for 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.