Content Comparison

Tool Line Too Far Down Vertically

If the Non-Blade Tool line is applied Too Far DownVertically, Increase the Vertical Adjustment.

Panel

For Additional Information:
See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

Expand

title

Insert excerpt

	FrameShop7x:Vertical Adjustment for Non-Blade Cartridges (Deboss/Pen/Vinyl): Definition
	FrameShop7x:Vertical Adjustment for Non-Blade Cartridges

General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decreasethe Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Image Removed

Image Removed Expandtitle

(Deboss/Pen/Vinyl): Definition
name	Vertical Adjustment

Image Added

Insert excerpt

	How to Adjust the Configurations
	How to Adjust the

Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Configurations
name	How to Adjust Configurations
nopanel	true