Content Comparison

Tool Line Too Far Left Horizontally

If the Non-Blade Tool line is applied Too Far LeftHorizontally, Increase the Horizontal Adjustment.

Panel

For Additional Information:
See Horizontal Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.

Expand

title

Insert excerpt

name
	FrameShop7x:Horizontal Adjustment for Non-Blade Cartridges (Deboss/Pen/Vinyl):Definition
	FrameShop7x:Horizontal Adjustment for Non-Blade Cartridges (Deboss/Pen/Vinyl):Definition

The

Horizontal Adjustment

defines the global Horizontalplacement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Non-Blade Tool line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment.

Image Removed

Expand

title	How to Adjust the Horizontal Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Image AddedImage Added

Insert excerpt

	How to Adjust the Configurations
	How to Adjust the Configurations
name	How to Adjust Configurations
nopanel	true