dani.simmonds
Aug 16, 2024
Jan 16, 2025
If the Outside cut of the V-Groove Outside has a Flare, Increase the Outside Rotation.
For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.
A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
the Configurations
