...
Tool Line Too Far Down | |
|---|---|
The tool line is applied too far down. |  |
Increase the Vertical Adjustment to move the tool line up. |  |
The object will now be applied in the correct place. |  |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. |  |
Tool Line Too Far Up | |
|---|---|
The tool line is applied too far up. |  |
Decrease the Vertical Adjustment to move the tool line down. |  |
The object will now be applied in the correct place. |  |
When making adjustments, click either the minus or plus button (-/+) at the end of the desired field about five or six times in the direction indicated. Click OK and do a test cut. Check the results of the cut and continue making adjustments until the desired outcome is achieved. | |
...