Page Comparison

45 Degree Outside
The 45 Degree Cartridge cuts the outside with a 45° bevel.

Select the 45 Degree Outside Bevel Type

Select the 45° Tab on the Configurations screen.

Select the specific Outside bevel type from the Current Bevel Type dropdown control:

Select the Area of Concern for the 45 Degree Outside Cut Below:

45 Degree Outside Cuts the Wrong Depth When Using a SKU
Select this topic to adjust the Depth Bias.

...

45 Degree Outside Exterior Backup is too Long
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Outside Exterior Backup is too Short
This is viewed from the front of the mat. Select this topic to adjust the Exterior Backup.

45 Degree Outside Exterior Overcut is too Long
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Outside Exterior Overcut is too Short
This is viewed from the front of the mat. Select this topic to adjust the Exterior Overcut.

45 Degree Outside Interior Backup is too Long
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Outside Interior Backup is too Short
This is viewed from the front of the mat. Select this topic to adjust the Interior Backup.

45 Degree Outside Interior Overcut is too Long
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

45 Degree Outside Interior Overcut is too Short
This is viewed from the front of the mat. Select this topic to adjust the Interior Overcut.

...