45 Degree Plus Outside | |
|---|---|
The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. |  |
Select the 45 Degree Plus Outside Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Outside bevel type from the Current Bevel Type dropdown control.
|  |
Select the Area of Concern for the 45 Degree Plus Outside Cut Below: |
|---|
45 Degree Plus Outside Cuts Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. |  |
...
45 Degree Plus Circle/Oval Outside Rotation Adjustments Using the Circle/Oval Rotation Utility | |
|---|---|
Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals. |   |
45 Degree Plus Outside Exterior Backup is too Long | |
|---|---|
Select this topic to adjust the Exterior Backup. |  |
...
Troubleshooting Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |   |