45 Degree Plus Outside | |
|---|---|
The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply. *Older systems may have a yellow plastic 45°+ Cartridge. |  |
Select the 45 Degree Plus Outside Bevel Type | |
|---|---|
Select the 45°+ Tab on the Configurations screen. Select the specific Outside bevel type from the Current Bevel Type dropdown control.
|  |
Select the Area of Concern for the 45 Degree Plus Outside Cut Below: |
|---|
45 Degree Plus Outside Cuts Wrong Depth When Using a SKU | |
|---|---|
Select this topic to adjust the Depth Bias. |  |
...
45 Degree Plus Outside Interior Backup is too Long | |
|---|---|
Select this topic to adjust the Interior Backup. |   |
45 Degree Plus Outside Interior Backup is too Short | |
|---|---|
Select this topic to adjust the Interior Backup. |   |
45 Degree Plus Outside Interior Overcut is too Long | |
|---|---|
Select this topic to adjust the Interior Overcut. |   |
45 Degree Plus Outside Interior Overcut is too Short | |
|---|---|
Select this topic to adjust the Interior Overcut. |   |
45 Degree Plus Outside Cuts the Wrong Size | |
|---|---|
Select this topic to adjust the Opening Adjustment. |  |
45 Degree Plus Outside has a Swoop | |
|---|---|
Select this topic to adjust the Rotation. |   |
45 Degree Plus Outside has a Flare | |
|---|---|
Select this topic to adjust the Rotation. |   |
45 Degree Plus Oval Outside has a Bump | |
|---|---|
Select this topic to adjust the Oval Rotation. |   |
45 Degree Plus Oval Outside has a Feather | |
|---|---|
Select this topic to adjust the Oval Rotation. |   |
Troubleshooting Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. |  |