Enable Cut the Outside |
|---|
Select whether to Cut the Outside with this toggle selection for the CMC Z1 and Z (9000z). Optionally, you could select the Cut Outside from the Outside Cut toggle for the CMC Z1 and Z (9000z). |
Set Advanced Options: Cut the Outside | |
|---|---|
Click the Set Advanced Options button to access the Advanced Outside Options. |  |
Select the desired Outside Cut setting from the Enable Cut Outside toggle. Click OK. The CMC will cut the outside of the mat with the selected setting. |  |
Enable Outside Cut On | |
|---|---|
Click the Enable Outside Cut to On to cut the outside of the mat. | |
Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. | |
Select the Enable Cut Outside toggle to On. Click OK. The CMC will now cut the outside of the mat. | |
Enable Outside Cut Off | |
|---|---|
Click the Enable Outside Cut to Off to not cut the outside of the mat. | |
Click the Set Advanced Options button on the Cut Preview to access the Advanced Outside Options. | |
Select the Enable Cut Outside toggle to Off. Click OK. The CMC will now not cut the outside of the mat. |  |
Cut the Outside Toggle | |
|---|---|
Cut the Outside ToggleOptionally, select this topic to see information on the Cut the Outside Toggle. |  |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |