Enable Cut the Outside |
|---|
Select whether to Cut the Outside with this toggle selection. Optionally, you could select the Cut Outside from the Outside Cut toggle for the CMC Z1 and Z (9000z). |
Set Advanced Options: Cut the Outside | |
|---|---|
Click the Set Advanced Options button to access the Advanced Outside Options. |  |
Select the desired Outside Cut setting from the Enable Cut Outside toggle. Click OK. The CMC will cut the outside of the mat with the selected setting. |  |
...
Cut the Outside Toggle | |
|---|---|
Optionally, select this topic to see information on the Cut the Outside Toggle. |  |
Set the Default for Cutting the Outside | |
|---|---|
The default setting for Cutting the Outside can be set in the Admin > Editor section. |  |
Set the Default for 90 Degree Outside Cut | |
|---|---|
The default setting for 90 Degree Outside can be set in the Admin > Cutting section. |  |