dani.simmonds
Nov 01, 2024
Nov 04, 2024
Use the VG Width to set the V-Groove as a Closed V-Groove or an Open V-Groove.
An Open V-Groove has a VG Width larger than 0 (Zero) and cuts from the front or the back of the mat.
Enter the desired VG Width to a value above 0 (Zero).
This will be the Width of the Open V-Groove.
See Width Adjustment in the Configurationsfor information on adjusting the V-Groove if it is cutting too narrow or too wide.Grooves: Configurations Screen
