Page Comparison

• This lesson shows how to make a free-floating unenclosed V-Groove.  

• See Trace Keyboard Shortcuts.

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

• Because this design contains no Arcs, there is no need to Tangify it or Convert Arcs into Splines. 

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

See: Tangify Function

See: Tangify All Circuits Function

See: Arc Tool in Trace

See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

The Convert Arc to Splines process will convert the Arcs to /wiki/spaces/FrameShop8x/pages/1942513851 which are easier to tangify to make cuts smoother.

See: Arcs Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Modified

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations

• NOTE: V-Groove/Pen/Deboss items do not have to be enclosed objects to be Traced.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design