changes.mady.by.user dani.simmonds
Saved on Aug 16, 2024
Saved on Sept 30, 2024
If the Pen is Too Large, Decrease the Opening Adjustment.
If the Pen is Too Small, Increase the Opening Adjustment.
For Additional Information: See Troubleshooting Utility for information on adjusting the object’s size.
Select desired Cartridge Tab.
Select the desired Bevel Type from Current Bevel Type.
Edit the desired Configuration field.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.