Versions Compared

Old Version 21

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 22

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

To Rotate the Starburst in Trace:

Info

*See Determining the Degree of Rotation for information on how to determine the optimum degree of rotation for your particular CutArt.

Expand
titleRotate Definition

The Rotation function in Designer the Design Editoris the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

See: Rotation in Designer the Design Editor Function

  • Click the Left < Rotate button.

  • The CutArt will Rotate.

  • Turn on the Dynamic Outsides if the rotated CutArt falls outside the edges of the mat.

Expand
titleRotate Definition

The Rotation function in Designer the Design Editoris the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

See: Rotation in Designer the Design Editor Function

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

Trace, Save, Cut

  • Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned Bevel Type. This refers to the Alignment Lines that we didn't Trace. Click Yes that you wish to continue. 

  • The CutArt is saved.

  • Load the CutArt into the Design editor.

  • Cut the CutArt.

Info

  • Since it is a Deboss design, you can also size it much smaller if desired without worrying about Overcuts and Backups

  • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

  • The Starburst design is completed.

Expand
titleBevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

See: Tracing the Design

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

See: Add CutArt Function

Expand
titleDeboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Comparison

You can see how much we changed the design when you compare it to what we started with. You can alter the design greatly by changing the number of sides of the template, selecting a different template, changing the CutArt placed, and even the number of degrees of rotation when you place it on the Editor.